+86 136 7975 8647

Staircase with Light

Straight Staircase

    GET IN TOUCH WITH US

    Any question please use our contact form. We will reply in short time.

    Staircase with Light

    $2920-3522
    • Note that the power of the lamp should not be too high
    • Surface brightness of the lamp should not be too high
    • No exposed light source, or use a soft and non-glaring matte surface,
    • Entire light strip Avoid dark areas in the middle
    • The automatic infrared sensor switch
    • The cost performance is not high
    • The wiring should be concealed during installation
    Category:

    Description

    MAECENAS IACULIS IACULIS

    The stairs at night must have lights, otherwise, it will be easy to fall, and the stairs with stair lights will look more artistic at night.
    Many people think that installing lamps and lanterns on the stairs will affect the aesthetics. In fact, it is not. The improvement of lighting design and lamps has achieved the effect of “concealing lamps and not seeing the light”.
    You will find that when the lamp sends out light and shines on the steps, the steps have a sense of space, and with layers, the significance of introducing light elements becomes obvious. Although only ordinary lamps and lanterns were used, the result still had to be praised for the improvement of the environment by the charm of light and darkness formed by light.
    In fact, staircase lights are very practical. Sometimes in the dark, we have a strong sense of insecurity about going up or down the stairs. If we use the correct lighting on the stairs, we can correctly illuminate the stairs and make it safer to use the stairs.

    1.) Wall recessed staircase light

    1. If you want to add a surprise factor to your staircase design, you can choose this staircase light design, and this may be the easiest way to do nothing.
      The height and interval should be considered when installing the lamps. Different anchor lamps have different light emitting methods and different powers. The specific height and interval should be determined in the field test.
    2. Pay attention that the power of the lamp should not be too high (usually 1 W of LED is enough, at most 3 W);
    3. The surface brightness of the lamp should not be too high (the surface light is soft, or there is no direct light in the field of vision during normal activities);
    4. The lamp should have no exposed light source, or use a soft and non-glaring matte surface;
    5. It is best to bring its own infrared sensor device;

    2.) Recessed stair lights on the bottom

    This is a very popular way to illuminate stairs. The LED light strip is embedded under the stair treads, which can see the light but not the cumbersome lamps, and has a very eye-catching visual effect. It is used indoors, there is no need to add chandeliers and wall lamps on the ceiling of the stairs; if it is used outdoors, there is no need for special light distribution. When the LED light is off, it is hidden, and when you turn it on at night or at any time, it will produce an amazing soft floating effect.
    The construction and installation of this lighting method are not difficult, th e key is the accuracy of the nodes and the meticulous and patient construction personnel.

    1.  Note that the power of the lamp should not be too high (in the light strips visible on the market, the lower the power, the better);
    2. The surface brightness of the lamp should not be too high (the surface light is soft, or there is no direct light in the field of vision during normal activities);
    3. The lamp should have no exposed light source, or use a soft and non-glaring matte surface, or be well hidden during installation;
    4. It is best to use the entire light strip or connect it seamlessly to avoid dark areas in the middle;
    5. The automatic infrared sensor switch is difficult to realize, and the cost performance is not high. A dual switch can be used;
    6. At present, there are no small products on the market that can be repeatedly disassembled and recharged. The wiring should be concealed during installation.

    3.) The hidden light under the stair railing

    Compared with installing a light strip under each step of the stairs, installing a light strip to illuminate the handrails of the stairs is labor-saving and much more economical. In clubs, villas, indoors, and outdoors, the use of this lighting method on stairs where the space is not particularly large is both beautiful and warm. However, professional lighting designers also pointed out that this kind of lighting is not suitable for public areas that require higher illuminance. If the stairs are very wide, other auxiliary lighting is needed to improve the safety factor of road illuminance.

    • Note that the power of the lamp should not be too high (in the light strips visible on the market, the lower the power, the better);
    •  The surface brightness of the lamp should not be too high (the surface light is soft, or there is no direct light in the field of vision during normal activities);
    • The lamp should have no exposed light source, or use a soft and non-glaring matte surface, or be well hidden during installation;
    • It is best to use the entire light strip or connect it seamlessly to avoid dark areas in the middle;
    •  The automatic infrared sensor switch is difficult to realize, and the cost performance is not high. A dual switch can be used;
    • The wiring should be concealed during installation.

    4.) Stairs with concealed LED light strip

    If there is a gap between the stair steps and the wall, you can also install light strips to wash the walls, provide facade lighting and space indirect lighting.

    1. Note that the power of the lamp should not be too high, because it is indirect facade lighting, it is acceptable within 10W/m;
    2.  The surface brightness of the lamp should not be too high (the surface light is soft, or there is no direct light in the field of vision during normal activities);
    3.  The lamp should have no exposed light source, or use a soft and non-glaring matte surface, or be well hidden during installation;
    4.  It is best to use the entire light strip or connect it seamlessly to avoid dark areas in the middle;
    5. Use a two-way switch;
    6.  The wiring should be concealed during installation.

    5.) Stairs with motion sensor LED lights

    Have you ever heard of LED lights that can be turned on automatically by motion sensing? This kind of lamp is the stair step sensor lamp. This lamp uses “light perception plus human body induction”. When the light is dark, the device will be activated, and the lamp will light up when people walk over. However, human body induction is flawed, because most of the country now uses dynamic induction, so if a person stands still on the stairs, the light will go out after a period of time.

    1. Note that the power of the lamp should not be too high;
    2. The surface brightness of the lamp should not be too high (the surface light is soft, or there is no direct light in the field of vision during normal activities);
    3.  The lamp should have no exposed light source, or use a soft and non-glaring matte surface, or be well hidden during installation;
    4. When the automatic infrared sensor switch is installed, no live wiring is allowed, and load short-circuit is strictly prohibited;
    5.  Due to the large starting current of fluorescent lamps and energy-saving lamps, it is recommended that one switch control less than 2 loads.
    6.  Because a certain amount of heat is generated when the light is on, the installation distance between the human body induction switch and the lamp should be 1-2 meters away. If the human body induction switch is too close to the light, it will affect the human body induction switch, especially the human body induction will be shortened. The service life of the switch.

    Additional information

    Color

    Black, Canvas, Dark Bronze, Forest Green, Sandtone, Terratone, White

    Hardware

    Classic Series, Contemporary Folding, Estate, Traditional Folding

    Smart Home

    VeriLock® Security Sensors, Wireless Open/Closed Sensors

    Material

    Glass, Steel

    Color

    Grey
    Black
    Brown
    Green
    Dark Green
    Dark Red
    Steel Blue
    White Oak
    Champagne
    Golden
    Fog Blue
    Red Wood

    Hardware

    Friction Hinge

    Flush Lock

    Hinge

    Roller

    Lock Set

    Mortise Locking

    Glass

    Proof Glass

    Frosted Glass

    Curved Glass

    Laminated Glass

    White Glass

    Single Glass

    Recommendation

    contact us to get quote